Garden Plants Wire Binding Hand Tying Machine Rolls Tape For Vineyard Vegetables

Garden Plants Hand Tying Machine With Rolls Tape For Vineyard and Vining Vegetables

【Adjustable Width】: The width of the opening of this Garden Plant Tool can be adjusted arbitrarily, which is convenient for tying thicker or thinner branches. The push pin is thickened to prevent breakage and does not hurt hands, and quick installation is more convenient and labor-saving. save working time:The working time of using a plant tying machine is 3 to 4 times faster than manual tying.

【Quality upgrade】:The use of more durable steel and high-strength plastics is not easy to rust and break, which greatly extends the service life. The tying machine head adopts a sheet-pressing design, which can hook the tape when hooking the belt without jamming or biasing the nails, avoiding the trouble of removing the belt, and the use process is more smooth.

Specification:
Material: anti-rust hard steel + high-strength plastic
Feature: Folding, Anti-Slip Grip
Model Number:Bind Branch Machine Garden Tools
Package Include:
1Pc Plant Tying Machine
2Pcs Replace the blade
1 box staples
10Pcs Plant Ribbon—Red
10Pcs Plant Ribbon—Blue

ACCESSORIES

►Charger

►hexagon bar wrench

►lubricant oil

►rope*2

FUNCTIONAL DESCRIPTION

Switch action

Before turning on the power switch, always check that the charger is removed and that the binding arm of the tie machine is open.
►To start the tool, press the power switch and the power indicator is on.
►To stop use, press the power switch again, the switch will pop up and the power indicator is off.

TYING OD.
The maximum opening of the tie arm is the maximum diameter of the tie and the maximum tie must not exceed 50mm(1.96INCH), otherwise tool damage and / or possible damage.

ASSEMBLY
Check the blade
►Before using the tool, check the blade for wear.
►Slow, worn blades can cause poor cuts, increase the difficulty of using the tool, and shorten its service life.

Adjust or replace the blade
CAUTION: The blade is very sharp, and the replacement or adjustment process must be very careful to avoid scratching your fingers.
►Press the handle slowly and check the upper and lower blades as normal, otherwise follow the method below.

1. Unscrew the inner hexagon screw with the attached hexagonal wrench；
2. Let the upper blade stick to the lower blade；
3. Re-tighten the inner hexagon screws.

►Make sure to use this thin washer when padded on some tool screws.
►When the upper blade is worn, follow the following method.
1. Remove the hexagon screw by using the attached hexagon wrench；
2. Remove the lock pin；
3. Remove the upper blade mounting seat；
4. Open the screw and replace the new blade；
5. After remounting the blade, install the blade.

OPERATION
1. Hold handgrip and press down with force, when you hear a voice of “da”. the tape is hooked by hook, loose handgrip to take out the tape, pay attention taht you can’t use an excessive force.

2. The branch of crop need to bind overlap from wire and other materials, and tie both them with the tape, and quickly press down the handgrip by force.

3. After cut the adhesive tape off you should loosen the handgrip quickly and make redundant small tape to spring out.

4. Attention: Tape bound should be parallel with nail groove.

Daily maintenance:

1. In the process of using and storing the tying machine, avoid the tying machine from contact with corrosive chemicals.

2. Try to avoid violent knocking of the tying machine, so as to avoid position deviation when the nail position is anastomosed and cause malfunction.

3. After using the tying machine, it should not be placed outdoors in the sun and rain, and the storage room should be wiped clean, so as not to affect the service life.

4. When storing, just add some butter on the handle rail of the tying machine, no need to refuel in other places.

SERVICE
1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
3. Follow instruction for lubricating and changing accessories.
4. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.

Applicaton

Our Plant Tying Machine is used to bind the vine branches of various plants, such as grapes, tomatoes, cucumbers, peppers, flowers and plant branches. The operation is simple, the work efficiency is high and the time is saved, and the crops will not be damaged.

Other picture