Battery Powered Tapener Hand Vine And Tree Tying Machine Stem Strapping Tapener Machine

Battery Powered Vine And Tree Tying Tools Plant Stem Strapping Tapener Machine

Battery powered and manual tapener guns and accessories give plants that desirable uniform appearance. One tapener does the work of several people tying by hand! Fully portable and extremely lightweight, the Electric Tapener Hand-Held Twist Tie Machine is designed specifically for use in the agricultural industry. This easy to use machine offers a full 8 hours of continuous tying per battery charge while avoiding carpel tunnel syndrome and repetitive motion injuries from hand twist tying.

Features:
The strapping machine is suitable for the fixed strapping of stems and rattan plants such as gardening, fruit trees, vegetables, etc.

Manual rope binding is labor-intensive, low-efficiency, and easy to damage tender stems and vines. The strapping machine uses plastic straps as strapping ropes, and can complete the strapping of crop stalks and vines with one-handed operation.

The baler has exquisite structure, simple operation, high work efficiency, and will not damage crops.

Our tape tool can be used on different kinds of plants, such as grapes, tomatoes, cucumbers, peppers, flowers and plant branches

Specification:
Name: Electric Binding Machine
Material: 65 manganese steel
Working voltage: 7.4V
Banding diameter: 50mm
Size: 37*26*8.5cm
 

Packing included:
1 * Electric Binding Machine
1 * Charger
1 * roll of Strap
1 * Lubricant 10ml
1 * Plastic Storage Box

Steps of Operation:

Hold handgrip and press down with force, when you hear a voice of "da". the tape is hooked by hook, loose handgrip to take out the tape, pay attention taht you can't use an excessive force.

The branch of crop need to bind overlap from wire and other materials, and tie both them with the tape, and quickly press down the handgrip by force.

After cut the adhesive tape off you should loosen the handgrip quickly and make redundant small tape to spring out.

Attention: Tape bound should be parallel with nail groove.

Install the rope
CAUTION: The tool shall use the specified rope.Other ropes may cause failure to install, tie failure, and / or damage the tool.
►The rope attached with this tool can be used directly and is an example of rope installation and a real sample reference for the purchase of rope.
►If the tie rope is out of replacement, follow the method below.

1. Remove the loading plate in the back direction.

2. Pull out the loading plate between left and right.

3. Install the new rope into the loading plate and press the loading plate.

4. Install the rope head up into the tool and wear the rope through the handle and arm according to the figure above (dotted line).Improper installation of rope may cause failure to tie properly or pull out difficult.

5. Press the handle to cut off the front material of the rope.

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

Warnings:

A )Work area safety

1. Keep work area clean and well lit.
2. Do not operate power tools in explosive atmospheres.
3. Keep children and bystanders away while operating a power tool.

B)Electrical Safety

1. Power tool plugs must match the outlet.
2. Avoid body contact with earthed or grounded surfaces.
3. Do not expose power tools to rain or wet conditions.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
5. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
6. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply.
7. Power tools can produce electromagnetic fields (EMF) that are not harmful to the user.

C)Personal Safety

1. Stay alert, watch what you are doing and use common sense when operating a power tool.
2. Use personal protective equipment.
3. Prevent unintentional starting.
4. Remove any adjusting key or wrench before turning the power tool on.
5. Do not overreach.
6. Dress properly.
7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
8. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.

D)Power tool use and care

1. Do not force the power tool.
2. Do not use the power tool if the switch does not turn it on and off.
3. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
5. Maintain power tools and accessories.
6. Keep cutting tools sharp and clean.
7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
8. Keep handles and grasping surfaces dry, clean and free from oil and grease.

E)Battery tool use and care
1. Recharge only with the charger specified by the manufacturer.
2. Use power tools only with specifically designated battery packs.
3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
4. Under abusive conditions, liquid may be ejected from the battery; avoid contact.
5. Do not use a battery pack or tool that is damaged or modified.
6. Do not expose a battery pack or tool to fire or excessive temperature.
7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.

SERVICE
1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
3. Follow instruction for lubricating and changing accessories.
4. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.

8V tapener hand tying machines 3

Applicaton

This tool is suitable for loose fixation of wires.Such as the branches of plants and stent fixation, multilinear beam fixation, etc.

Other picture